2024 Updated 300-615 Tests Engine pdf - All Free Dumps Guaranteed!
Latest CCNP Data Center 300-615 Actual Free Exam Questions
NEW QUESTION # 54
Refer to the exhibit. An engineer must restore the connectivity issue between NEXUS-SW-3 and NEXUS-SW-4. The engineer can ping the physical and loopback interfaces used in the underlay from VTEP-1. However, communication between the SVIs in NEXUS-SW-3 and NEXUS-SW-4 fails. Which action resolves the issue?
- A. Reload the NEXUS-SW-2 to enable the hardware Ethernet store-and-fwd-switching feature.
- B. Manually set the interface MTU to support jumbo frames on the NEXUS-SW-2.
- C. Reconfigure the VXLAN features in the VTEP switches on the NEXUS-SW-2.
- D. Change the VNI to VLAN mapping on the NEXUS-SW-2.
Answer: D
NEW QUESTION # 55
One of Cisco Nexus Series interfaces has become errdisabled with the error message "DCX-No ACK in 100 PDUs". What is the cause of this error?
- A. LLDP is disabled on the switch.
- B. The host has not responded to the Control Sub-TLV DCBX exchanges of the switch.
- C. The acknowledgement number in the server response has not incremented for 100 exchanges.
- D. Cisco Discovery Protocol is disabled on the switch.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/switches/nexus-5000-series-switches/116249-troubleshoot-nexus-00.html
NEW QUESTION # 56
Refer to the exhibit.
After a failover occurs, which two actions must be performed on Switch-B to manually preempt the operational primary role back to Switch-A? (Choose two.)
- A. Configure the local vPC role priority to have the same value as Switch-A.
- B. Disable and then re-enable the vPC peer-keepalive link.
- C. Configure the local vPC role priority to have a higher value than Switch-A.
- D. Disable and then re-enable the vPC peer link.
- E. Configure the local vPC role priority to have a lower value than Switch-A.
Answer: C,D
NEW QUESTION # 57
The external routes fail to propagate to leaf switches in Cisco ACI fabric. Which two actions resolve the issue?
(Choose two.)
- A. Specify the spine nodes as route reflectors.
- B. Assign an MP-BGP AS number to the fabric.
- C. Enable the VTEP pool in the fabric.
- D. Configure an MP-BGP area.
- E. Associate the correct contract to the L3Out.
Answer: A,B
Explanation:
Section: Network
NEW QUESTION # 58
Refer to the exhibit.
After the configuration is performed, guestshell continues to use 2%CPU. Which action resolves the issue?
- A. Resync the database
- B. Recreate the guestshell
- C. Reboot the switch
- D. Reboot the guestshell
Answer: D
NEW QUESTION # 59
Refer to the exhibit.
Sw1 and Sw2 are two Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. Which statement describes what happens in this scenario?
- A. Sw1 and switch 2 perform the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs, depending on the hashing.
- B. Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them out to the underlay network through the uplink interfaces.
- C. Sw1 performs the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs.
- D. Sw2 did not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.
Answer: C
NEW QUESTION # 60
Refer to the exhibit.
An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?
- A. Ensure that the zone members have different names.
- B. Set the distribute policy of the zone to full.
- C. Change the name of one of the zones to match the other zone set.
- D. Import or export a zone set between the switches to synchronize the switches.
Answer: D
Explanation:
Explanation
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pd
NEW QUESTION # 61 
Refer to the exhibit. The vPC between switch1 and switch2 does not work. Which two actions resolve the problem? (Choose two.)
- A. Configure the IP address on the interface.
- B. Match the vPC domain ID between the two devices.
- C. Activate VLANs on the vPC.
- D. Configure one of the switches as primary for the vPC.
- E. Correct the configuration of the vPC peer link and the vPC peer keepalive.
Answer: B,C
Explanation:
Section: Network
NEW QUESTION # 62 
Refer to the exhibit. A network engineer creates an EEM script to trigger an SNMP notification when a user enters configuration mode, but the trap is not received when the condition is met. Which action resolves the issue?
- A. Append action 2.0 cli "conf t" to the script
- B. Modify cli match "conf t" to "snmp match "conf t"
- C. Append action 2.0 event-default to the script
- D. Modify snmp-trap strdata "Configuration changed" to syslog msg Configuration changed
Answer: C
NEW QUESTION # 63 
Refer to the exhibit. VSAN traffic is not routed as expected. Which action should be taken to resolve the issue?
- A. Configure the hello timer to match the neighbor
- B. Reset the error packet counter
- C. Configure the FSPF dead interval with a value higher than 80 seconds
- D. Reset the inactivity timer on switch-2
Answer: A
NEW QUESTION # 64
Refer to the exhibit.
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
- A. event cli match 'configure terminal'
- B. event syslog occurs 10
- C. action 2.0 event-default
- D. event policy-default count 1 time 100
Answer: C
NEW QUESTION # 65
Refer to the exhibit.
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
- A. Reconfigure the initiator and the target to be in the same zones.
- B. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.
- C. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
- D. Reactivate the zoneset.
Answer: D
NEW QUESTION # 66
DRAG DROP
Drag and drop the commands from the left onto the correct categories on the right.
Select and Place:
Answer:
Explanation:
Section: Automation
NEW QUESTION # 67
A network engineer finds an error that says, "BIOS failed power-on self-test." When the engineer checks the console, they discover that the Cisco UCS Blade firmware upgrade process stopped at the "Configuring and testing memory" stage.
Which set of actions resolves the issue?
- A. 1. Update the BIOS firmware on a server.
2. Activate the BIOS firmware on a server - B. 1. Upgrade the firmware on an adapter.
2. Enable the firmware on an adapter. - C. 1. Add the CIMC firmware on a server.
2. Initialize the CIMC firmware on a server. - D. 1. Create a new host firmware package.
2. Assign the host firmware package to the service profile template.
Answer: A
NEW QUESTION # 68
Refer to the exhibit.
An engineer fails to implement a Cisco UCS Manager integration manager. The credentials and IP connectivity between Cisco APIC and UCS Manager are configured as expected. Which action resolves the issue?
- A. Install ExternalSwitch app in the APIC controller
- B. Change the Integration Manager name to FQDN of the Cisco UCS Manager
- C. Disable HTTP to HTTPS redirection in Cisco UCS Manager
- D. Enable JSON API on the Cisco UCS Manager
Answer: A
NEW QUESTION # 69
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Set the MTU to 1500 bytes.
- B. Configure the same HSRP group on both devices.
- C. Configure HSRP version 2.
- D. Enable IP redirects.
Answer: C
NEW QUESTION # 70
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install Infrastructure Firmware, then Install Server Firmware.
- B. Install Server Firmware, then Install Infrastructure Firmware
- C. Install Hypervisor Firmware, then Install Infrastructure Firmware
- D. Install infrastructure Firmware, then Install Hypervisor Firmware.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma
NEW QUESTION # 71
Refer to the exhibit.
The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?
- A. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- B. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- C. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- D. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
Answer: B
Explanation:
Explanation
Need exact snap shot to confirm the following.
The selection of is due to
* SNMP command has the key word "oid".
* The command "switchto vdc Core" show run in "enable" mode, not "config t" mode.
NEW QUESTION # 72
Refer to the exhibit.
A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues. What is the role of the interface Eth1/7?
- A. fabric interconnect uplink interface
- B. IOM network interface
- C. IOM host interface
- D. server interface
Answer: A
Explanation:
Explanation
E1/7 is border interface, which is used as uplink. All other veth interfaces are SIF, which stands for Server Interface.
NEW QUESTION # 73
Refer to an exhibit.
An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?
- A. Reload the same system image.
- B. Save the system image in NVRAM.
- C. Load a new system image.
- D. Use the same system image as the kickstart image.
Answer: C
NEW QUESTION # 74
An engineer is recovering a fabric interconnect from a failed upgrade. The engineer booted the fabric interconnect to the switch(boot)# prompt and copied all the required images.
Which image must be linked to nuova-sim-mgmt-nsg.0.1.0.XXXXXXXXX1 bin to make the management image compliant with the Cisco UCS Manager?
- A. Cisco IMC
- B. Kickstart
- C. UCS Manager
- D. System
Answer: C
NEW QUESTION # 75
Refer to the exhibit.
A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?
- A. Replace the SFP port module in fc2/10.
- B. Configure the admin port type E on the upstream switch that connects the port.
- C. Enable NPIV on the upstream switch that connects the port.
- D. Configure the BB_credit buffers on the upstream switch that connects the port.
Answer: C
NEW QUESTION # 76
......
Passing the Cisco 300-615 exam requires a deep understanding of data center infrastructure technologies and the ability to apply that knowledge in real-world troubleshooting scenarios. Earning this certification demonstrates an individual’s expertise in identifying and resolving complex data center infrastructure issues and can lead to career advancement opportunities in data center operations and management.
300-615 Dumps Updated Practice Test and 243 unique questions: https://dumpstorrent.prep4surereview.com/300-615-latest-braindumps.html
