[Feb 11, 2022] Powerful C1000-055 PDF Dumps for C1000-055 Questions
Authentic C1000-055 Dumps - Free PDF Questions to Pass
NEW QUESTION 26
IBM Security QRadar initiates a sequence of events when a primary high-availability (HA) host fails. During failover, the secondary HA host assumes the responsibilities of the primary HA host. The following actions are completed.
1.1. If configured, external shared storage devices are detected and the file systems are mounted.
2. 2. The secondary HA host connects to the console and downloads configuration files.
3. 3. A management interface network alias is created, for example, the network alias for ethO is ethO:0.
4. 4. The cluster virtual IP address is assigned to the network alias.
5. 5. All QRadar services are started.
What is the order of the sequence?
- A. 1.2,3,4,5
- B. 1,4,3,2,5
- C. 1,3,4,5.2
- D. 1,4,5,3,2
Answer: A
NEW QUESTION 27
The deployment professional needs to pull events from an HR system that are recorded in a database. Which protocol would be used to collect the data?
- A. syslog
- B. HTTP
- C. JDBC
- D. OPSEC/LEA
Answer: C
NEW QUESTION 28
A deployment professional needs to configure the X-Force Threat Intelligence Feed through a web proxy to access the cloud servers hosting the information.
How should the deployment professional configure the proxy for this access?
- A. Complete the 'System Proxy' values in the Advanced System Settings section of the Admin tab
- B. Edit the Vetc/httpd/conf.d/ssl.conf and Vopt/qradar/dca/server.ini' files on the Console and restart some services
- C. Complete the 'Server Config' values in the Advanced Update Configuration section of Auto Updates )
- D. Reconfigure iptables access on each managed host to provide access to 'update.xforce-security.com' and
'license.xforce-security.com' and restart some services
Answer: A
NEW QUESTION 29
A deployment professional needs to create Identity Excluded Searches so as to prevent specific Asset entries from being created. These Asset entries are being created from the events that the QRadar deployment is receiving from different Log Sources.
To add to these Identity Excluded Searches, which type of Saved Searches should be created?
- A. Real Time Searches
- B. Searches containing last 24 Hours data
- C. Searches containing last 7 Days data
- D. Searches containing last 15 Minutes Data
Answer: A
NEW QUESTION 30
A deployment professional needs to install a new QRadar application downloaded from the IBM Security App Exchange.
Which option would the deployment professional select from the QRadar Console GUI under Admin: System Configuration to install the downloaded application?
- A. Content Management.
- B. Application Management.
- C. Extensions Management.
- D. Customization Management.
Answer: A
NEW QUESTION 31
A deployment professional has been asked to ensure the system can be integrated with another system which contains lists of IP addresses and CIDR ranges in an automated manner, to allow rules to target specific communication endpoints.
Which part of QRadar is designed to hold and manage this data?
- A. Building Blocks
- B. Domain Definition
- C. Asset Profiles
- D. Network Hierarchy
Answer: A
NEW QUESTION 32
The client implemented a QRadar Network Insights (QNI), and is looking to add post-incident investigations and threat hunting activities.
What should the deployment professional recommend?
- A. An additional QRadar Flow processor is required.
- B. Existing appliances will suffice.
- C. An additional QRadar Incident Forensics is required.
- D. An additional QRadar Network Inspector is required.
Answer: A
NEW QUESTION 33
What are anomaly detection rules used for?
- A. Detecting an activity that is greater or less than a specified range.
- B. Detecting volume changes that occur in regular patterns.
- C. Detecting event traffic.
- D. Detecting when unusual traffic patterns occur in the network.
Answer: B
NEW QUESTION 34
A deployment professional receives instructions to virtualize the currently installed QRadar SIEM All-in-One appliance and to provide requirements. VM specifications must suffice for 4000 EPS.
What are the minimum processor and memory requirements that the deployment professional must use?
- A. 32 GB Memory, 16 CPU Cores
- B. 8 GB Memory, 4 CPU Cores
- C. 128 GB Memory, 16 CPU Cores
- D. 256 GB Memory, 32 CPU Cores
Answer: B
NEW QUESTION 35
As a small company has grown, no standard was defined. Each time the network was expanded, the bid with the lowest cost was accepted. As a result, the infrastructure is a mix of equipment from different manufactures.
A deployment professional is planning on standardizing flow collection. Which flow source data format should the deployment professional use?
- A. sFlow
- B. NetFlow
- C. A-Flow
- D. J-Flow
Answer: A
NEW QUESTION 36
A deployment professional is notified that event and flow data that are sent to the All-in-One are not processing. However, there is no issue with the existing data.
What should the deployment professional investigate?
- A. Check the connection between Console and the Event Processor.
- B. Check the connection between All-in-One and the X-Force.
- C. Check to see if the Event Collector license is expired.
- D. Check to see if the All-in-One license is expired.
Answer: C
NEW QUESTION 37
A deployment professional is about to execute Server Discovery to populate the Host Definition Building Blocks. The deployment professional is working in a monitored environment and does not wish to set off any network scanner alarms.
What step should the deployment professional take to ensure that good results are returned and that no alarms are raised?
- A. Warn the network monitoring team that QRadar is about to run a network port scan
- B. Ensure that events from the relevant servers are being collected successfully
- C. Set the 'Passive discovery' flag in Advanced System Settings in the Admin tab
- D. Ensure that the flow sources are configured correctly and collecting data
Answer: C
NEW QUESTION 38
Two newly installed QRadar applications are creating performance issues at the console. How should the deployment professional proceed?
- A. Deploy two different App Hosts as both applications might need dedicated resources. App auto-balancing is enabled by default.
- B. Deploy two different App Nodes as both applications might need dedicated resources. App auto-balancing is enabled by default.
- C. Deploy one App Node, move apps from the console and test if the situation improves.
- D. Deploy one App Host, move apps from the console and test if the situation improves.
Answer: B
NEW QUESTION 39
A deployment professional configures QRadar auto-update with the automatic install option for all update types where automatic install is available.
Assuming all auto-update installations are successful, which update types will need manual installation?
- A. Application updates, DSM, scanner and protocol updates
- B. Major updates, scanner and protocol updates
- C. Application updates and major updates
- D. Configuration updates and WinCollect updates
Answer: A
NEW QUESTION 40
A deployment professional found the System Activity Reporting (SAR) notifications alert "Performance degradation was detected in the event pipeline. Expensive DSM extensions were found". From the Log Sources under date creation, it can be seen that a new DSM was installed by another team member today.
To troubleshoot this issue, what steps can the deployment professional take? (Choose two)
- A. Ensure that the log source extension is applied to all of the log sources.
- B. Review the payload of the notification to determine which expensive DSM extension in the pipeline affects performance.
- C. Run the DSM Editor and select Optimize over DSM payload to correct this error.
- D. Order your log source parsers from the log sources with the most sent events to the least and disable unused parsers.
- E. Review the debug file /var/log/qradar.dsm.debug
Answer: B
NEW QUESTION 41
A deployment professional needs to configure the IBM QRadar systems so that data is forwarded to one or more vendor systems, such as ticketing or alerting systems.
Which event format options can the deployment professional use for forwarding destination configuration?
- A. json, cef and payload
- B. leef, json and cef
- C. normalized, json and cef
- D. payioad, normalized and json
Answer: C
NEW QUESTION 42
......
IBM C1000-055 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
Guaranteed Accomplishment with Newest Feb-2022 FREE: https://dumpstorrent.prep4surereview.com/C1000-055-latest-braindumps.html
