Achive your Success with Latest AVIXA CTS-I Exam [Jun 02, 2026]
The CTS-I Exam Test For Brief Preparation
NEW QUESTION # 45
What is a ground loop?
Response:
- A. A continuous isolation between receptacles and electrical circuits
- B. An electrically conductive area that has two or more ground reference connections
- C. An electrical connection between any grounded conductor and any non-current-carrying metal object
- D. An interruption of a cable shield connection
Answer: B
NEW QUESTION # 46
The advantages of using a dual-channel FFT analyzer to adjust equalization include: (Choose all that apply.)
- A. being less complicated than the RTA method
- B. the ability to be optimized for different types of music
- C. viewing the sound spectrum in both the frequency and time domain
- D. identifying reflections in the room and isolating only the signals you want to measure
Answer: C,D
NEW QUESTION # 47
What type of drawing view shows the layout of items on the ceiling?
- A. Elevation drawing
- B. Reflected floor plan
- C. Reflected ceiling plan
- D. Detail ceiling drawing
Answer: C
NEW QUESTION # 48
Which of the following tasks would not be included in a preventive maintenance program? (Choose all that apply.)
- A. Testing the failover systems for redundant spare equipment
- B. Checking the equalization and gain structure on the audio replay system
- C. Changing the preset frequencies on the handheld radio system
- D. Checking the batteries in uninterruptable power supply systems
Answer: B,C
NEW QUESTION # 49
The connector pictured below is known as:
Response:
- A. Direct connection termination
- B. Captive screw compression termination
- C. Insulation displacement
- D. Ancillary dimpled solder connection
Answer: B
NEW QUESTION # 50
Which of the following must the as-built drawings show?
Response:
- A. The client's vision for the finished system
- B. Original system design specification
- C. Details of the system as finally installed
- D. Mechanical drawings
Answer: C
NEW QUESTION # 51
What is a macro?
Response:
- A. A single function activated by a switch
- B. A function activated by a button
- C. A set or sequence of functions activated by a button
- D. Multiple functions activated by separate buttons
Answer: C
NEW QUESTION # 52
HDCP is capable of working over which of the following interfaces? (Choose all that apply.)
- A. HDBaseT
- B. MHL
- C. HDMI
- D. DisplayPort
Answer: A,B,C,D
NEW QUESTION # 53
A limitation of using the RTA method to adjust equalization is:
- A. that it cannot differentiate between high and low frequencies
- B. that it cannot differentiate between the direct loudspeaker sound and the interference from combined direct and reflected energy
- C. that an RTA is not available as a smartphone app, as computer software, or as dedicated hardware
- D. that it is not legal in some jurisdictions
Answer: B
NEW QUESTION # 54
Which are best-practice methods for dressing a rack?
Select all that apply.
Response:
- A. Secure heavy cable bundles to lacing bars.
- B. Keep power cords separate from signal cables.
- C. Bundle cables by signal type.
- D. Use removable cable ties to secure a cable bundle.
Answer: A,B,C,D
NEW QUESTION # 55
Which document lists out the specific materials needed for an AV installation?
- A. Presubmittal documents
- B. As Built drawings
- C. Architectural drawings
- D. Bill of Materials
Answer: D
NEW QUESTION # 56
Where are Blu-ray players typically housed inside of AV racks?
- A. In the very back of the rack
- B. Near the top of the rack
- C. At eye-level
- D. At the bottom of the rack
Answer: C
NEW QUESTION # 57
A "just noticeable" change in sound pressure level, either louder or softer, requires a _____ change.
- A. +/-6 dB
- B. +/-3 dB
- C. +/-1 dB
- D. +/-10 dB
Answer: B
NEW QUESTION # 58
Which of the following are associated with sound pressure levels? (Choose all that apply.)
- A. Is the ultimate method for quantifying background noise levels
- B. Eliminates distortion in speech reinforcement
- C. Can most accurately be measured with a Class 1 precision SPL meter
- D. Is typically measured in decibels (dB SPL)
Answer: C,D
NEW QUESTION # 59
Which of the following are HDCP authentication steps? (Choose all that apply.)
- A. Audio and video sync check
- B. Session exchange
- C. Key exchange
- D. Locality check
Answer: B,C,D
NEW QUESTION # 60
Which symbol helps an AV professional find their way around a construction site?
- A. Section Cut Flags
- B. Column Lines
- C. Match Lines
- D. Elevation Flags
Answer: B
NEW QUESTION # 61
For what reasons is it important to set system gain?
Select all that apply.
Response:
- A. To maximize S/N ratio
- B. To minimize the gain structure
- C. To minimize distortion
- D. To maximize clipping
Answer: A,C
NEW QUESTION # 62
What type of fiber termination has an insert and twist connection?
- A. ST
- B. Hermaphroditic
- C. LC
- D. BNC
Answer: A
NEW QUESTION # 63
When powering a system off, which device from the following list should you turn off first?
- A. Wireless mic receivers
- B. Pre-amplifiers
- C. Blu-ray players
- D. Power amplifiers
Answer: D
NEW QUESTION # 64
Which device is used to verify signal integrity throughout a video system?
Response:
- A. A Video Optimization meter (VOM)
- B. A volt meter to check resistance
- C. An impedance meter
- D. An oscilloscope
Answer: C
NEW QUESTION # 65
What method can a technician use onsite to verify that the AV device is set to the proper IP address?
Response:
- A. Use a USB connection to the CPU and the HyperTerminal program
- B. Use an S-video hook up on a DVD drive and the Mac program
- C. Connect directly to the CPU using an XLR connector and the Ping program
- D. Use a DVI-D connector and dial in on a phone device
Answer: A
NEW QUESTION # 66
......
AVIXA CTS-I - Installation Exam Syllabus Topics:
| Topic | Weight |
|---|---|
| Duty A: Conducting Pre-Installation Activities | 20% |
| Task 1: Review Audiovisual Project Documentation | 4% |
| Task 2: Conduct Technical Site Survey | 4% |
| Task 3: Prepare for Audiovisual Installation | 4% |
| Task 4: Evaluate Overall Facility Readiness | 4% |
| Task 5: Conduct On-Site Preparations for Installation | 4% |
| Duty B: Conducting Site Rough-In/First-Fix | 10% |
| Task 1: Deinstallation of Existing Equipment and cabling | 2% |
| Task 2: Mount Substructure | 4% |
| Task 3: Pull Cable | 4% |
| Duty C: Installing Audiovisual Systems | 38% |
| Task 1: Assemble AV Rack | 4% |
| Task 2: Wire the AV Equipment Rack | 5% |
| Task 3: Distribute AV Equipment | 4% |
| Task 4: Mount AV Equipment | 4% |
| Task 5: Terminate Cables | 5% |
| Task 6: Configure Network Properties of Equipment | 4% |
| Task 7: Load Configuration and Control Programs | 4% |
| Task 8: Test the AV System | 4% |
| Task 9: Calibrate the AV System | 4% |
| Duty D: Perform Systems Close Out | 11% |
| Task 1: Demonstrate to Client or Client's Representative that System Performs to Specifications | 4% |
| Task 2:Provide Training on System Operation | 4% |
Revolutionary Guide To Exam AVIXA Dumps: https://dumpstorrent.prep4surereview.com/CTS-I-latest-braindumps.html
